[ath9k-devel] Patch "ath9k: Add a module parameter to invert LED polarity." has been added to the 4.4-stable tree

[g***@linuxfoundation.org]

This is a note to let you know that I've just added the patch titled

ath9k: Add a module parameter to invert LED polarity.

to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
ath9k-add-a-module-parameter-to-invert-led-polarity.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <***@vger.kernel.org> know about it.


From cd84042ce9040ad038e958bc67a46fcfc015c736 Mon Sep 17 00:00:00 2001
From: "Vittorio Gambaletta (VittGam)" <linux-***@vittgam.net>
Date: Mon, 11 Apr 2016 04:48:54 +0200
Subject: ath9k: Add a module parameter to invert LED polarity.

From: Vittorio Gambaletta (VittGam) <linux-***@vittgam.net>

commit cd84042ce9040ad038e958bc67a46fcfc015c736 upstream.

The LED can be active high instead of active low on some hardware.

Add the led_active_high module parameter. It defaults to -1 to obey
platform data as before.

Setting the parameter to 1 or 0 will force the LED respectively
active high or active low.

Cc: <linux-***@vger.kernel.org>
Cc: <ath9k-***@qca.qualcomm.com>
Cc: <ath9k-***@lists.ath9k.org>
Signed-off-by: Vittorio Gambaletta <***@vittgam.net>
Signed-off-by: Kalle Valo <***@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <***@linuxfoundation.org>

---
drivers/net/wireless/ath/ath9k/init.c | 7 +++++++
1 file changed, 7 insertions(+)

--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -49,6 +49,10 @@ int ath9k_led_blink;
module_param_named(blink, ath9k_led_blink, int, 0444);
MODULE_PARM_DESC(blink, "Enable LED blink on activity");

+static int ath9k_led_active_high = -1;
+module_param_named(led_active_high, ath9k_led_active_high, int, 0444);
+MODULE_PARM_DESC(led_active_high, "Invert LED polarity");
+
static int ath9k_btcoex_enable;
module_param_named(btcoex_enable, ath9k_btcoex_enable, int, 0444);
MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence");
@@ -600,6 +604,9 @@ static int ath9k_init_softc(u16 devid, s
if (ret)
return ret;

+ if (ath9k_led_active_high != -1)
+ ah->config.led_active_high = ath9k_led_active_high == 1;
+
/*
* Enable WLAN/BT RX Antenna diversity only when:
*


Patches currently in stable-queue which might be from linux-***@vittgam.net are

queue-4.4/ath9k-add-a-module-parameter-to-invert-led-polarity.patch
queue-4.4/ath9k-fix-led-polarity-for-some-mini-pci-ar9220-mb92-cards.patch